When Is Baby Too Long for Mesa Car Seat Pictures

Updated January 2022

While UPPAbaby is a very popular name in the stroller world, MESAisn't usually the get-go model name that pops into your mind when you call up about an infant carseat. Just maybe it should be considering they hit this 1 correct out of the park! I'grand thoroughly impressed, from the installation, to the ease of utilise, to the aesthetics.

MESA Specs & Details:

• • • For babies iv-35 lbs and 32 inches or less (1″ rule besides applies)
    • No-rethread harness with five-position forepart-adjustable headrest
    • 2 crotch strap/buckle positions
    • Lowest harness slot height is almost 5.5″ and highest harness slots about 10″
    • Removable baby insert recommended for infants 4-eight lbs.
    • Robust caput wings and shell lined with thick energy-absorbing EPS foam for enhanced side-bear on protection
    • SMARTSecure™ system features automobile-retracting lower anchor LATCH attachments
    • Built-in lockoff for seatbelt installations
    • Tension indicator on base – turns from reddish to green when base is installed tightly
    • Recline angle indicators on both sides of base
    • Storage pockets in encompass for keeping buckles out of the way when placing a child in the seat
    • 7 year lifespan before expiration

MESA Base of operations – the base is very low profile and clean looking. The entire base is rounded and smooth so it won't leave a paring or scuff in your vehicle upholstery. The blue lockoff is located in the center of the beltpath. The LATCH connectors are stored in nifty picayune compartments and you lot release them by pushing a push on meridian of the base of operations. That'south a prissy touch on because then you don't have LATCH straps flapping around interfering with your seatbelt installation or whacking you in the shin when carrying the base. There are recline angle indicators on both sides of the base and a button on top to adjust the recline on the base (in that location are 4 positions). A trivial window above the lockoff turns from red to green when the base is installed properly. I will discuss this more in the installation section.

Extra MESA bases can be purchased separately for $119.99

The 2022 MESA is bachelor in several fashions. Bryce (White/Gray), Henry (Blue Gray Merino Wool), Jordan (Gray Merino Wool) & Jake (Black). Fun Fact: They were all named subsequently children of UPPAbaby employees!. UPPAbaby was the first manufacturer to bring Merino wool to market every bit a naturally flame retardant manner that'south still able to meet federal safety standards without added chemicals. Both the Henry and Jordan fashions are OEKO-TEX Standard 100 certified fabrics. They are also fabricated without lanolin, and then the Merino wool fabrics are naturally allergen-free also.

A push button on top of the handle allows y'all to release the MESA from the VISTA or CRUZ stroller with one mitt. The handle has 3 positions, all of which can be used in the machine. The release machinery to disassemble the carrier from the base is located on the back of the seat above the bluish console that serves every bit the shoulder chugalug guide for European-style beltpath installation when the seat is installed without the base of operations (2014 version only)

The seat itself is fairly long front to dorsum and should accommodate tall babies well. It measures virtually 28″ front to back when attached to the base and almost 26″ when installed baseless. It'south non particularly narrow and measures about 17″ wide. The base itself is a tad over xiv″ broad and should puzzle well next to other seats due to its depression profile. Internal seated height measures about 17.5″ tall to the top of the adjustable headrest.

Installation & Fit to Vehicle:

UPPAbaby claims that the LATCH installation on this seat only takes about 10 seconds and I will say that is accurate. Every bit you tin can see in the video in a higher place, there's non much to it and it's equally easy every bit they claim.

Lower the recline pes until the recline indicator shows green, then button the LATCH release buttons to remove the LATCH connectors, clip them onto your lower anchors, and printing downward on the base. Yous will hear a ratcheting sound as the base tightens. Keep pressing downward on the base until the tension indicator turns from red to green in the little window. That's it! A rock-solid install, effortlessly. Once information technology's installed tightly, double bank check the recline angle indicator to exist sure it'due south still properly reclined. Too, UPPAbaby states that the Mesa must not be touching the vehicle seat in forepart of it and so make certain there is at least a millimeter of infinite between the carseat and the dorsum of the front end seat.

Center LATCH Installations with Not-Standard Spacing: UPPAbaby allows the center seating position to exist used with LATCH if the lower anchors are spaced less than 22″ apart and the seating position is approved for utilise with LATCH by the vehicle manufacturer. If the anchors are more than 22″ apart or the manufacturer does not approve that seating position for LATCH, then the vehicle seatbelt must be used for installation.

You can see the green window above the lockoff that indicates appropriate tightness. The gray button to a higher place it is to release the recline pes and the orangish buttons on the sides are to release the LATCH connectors from their storage compartments.

Greenish window above lockoff indicates appropriate tightness. Grayness push on top releases recline pes. Orange buttons on the sides release LATCH connectors.

To install the MESA base with a seatbelt – open the blue lockoff, thread both portions of the lap and shoulder belt through the base and under the lockoff, then buckle. Pull on the shoulder belt portion of the chugalug to remove all the slack from the lap belt portion and clamp the lockoff shut over both the lap and shoulder belt until it clicks. Cheque for tightness past tugging at the beltpath – if the base doesn't movement more than than 1″ from side-to-side or from front-to-dorsum so your MESA base is properly installed!

Inflatable seatbelts  (bachelor on sure Ford and Mercedes vehicles) are Non approved for installation but in these vehicles yous can utilise the lower LATCH anchors to install the MESA base of operations instead.

The carrier attaches easily to the base. In that location is no jiggling around to find that sweet spot to click it in. You literally just fix it there and it clicks correct in similar butter—if butter could click. To release the carrier from the base of operations, pull the handle on the back of the seat and lift. This was as well very seamless without any hang-ups or attempt.

Fit to Child:

I had two models for this seat. The beginning was my son Declan, who is 16 weeks, 13 lbs and 26.v inches. I love the fit on him. He has the harness on the 2nd position and actually needs the buckle in the 2nd outward position, probably due to his fat textile diaper butt. The harness is extremely easy to tighten on him, which is a perk to me because he HATES the tug-tug-tug other seats require to tighten instead of the one smooth movement the MESA has. The shoulder pads provide acceptable protection from the harness rubbing on his neck without being big and intrusive. Sometimes I experience as though infant seat harness pads go far hard to become a good fit on the shoulders of tiny babies, and as well prevent the breast clip from being in the appropriate place; not so with this seat. The chest clip is a nice size and doesn't swallow him. One thing that I really like is how deep the seat is. Declan has long legs, and they hang off the edge of his usual infant carseat. He tin can near boot the vehicle seat already and I'm constantly whacking his feet on things when I carry him in it from the firm to the car. None of this is unsafe (well, I approximate whacking his anxiety on the door frames isn't the nicest thing), but I like the fact that he's completely independent in the MESA. The head protection is close enough to his head to brand me feel like it would give it the proper support in a collision, but not so shut to his caput that he gets bellyaching.

Bully fit on 13lb Declan!

My 2nd model was Declan's tiny buddy, Logan. Logan was iv weeks, xx inches, and seven lbs 8 oz at the fourth dimension of the photos. He isn't the biggest fan of the buckling/tightening process and so I didn't want to retake the pictures with him in the seat using the infant support cushion that comes with the seat, merely he fits amazingly well without it. In fact, I had to enhance the harness up a slot to fit him properly. Even with his tiny little trunk, the chest prune and harness covers were not intrusive. He was adequately supported, and the recline was appropriate for a newborn, and a depression birth weight one at that.

Buckle rests nicely against the body without gaps.

Bully fit even without the infant insert.

Shoulder pads don't interfere with fit on a newborn-sized baby.

For a preemie or very small newborn, the harness strap covers should be removed. The fit on the Huggable Images preemie doll is very good. This doll represents a four lb., 17″ preemie. Using the lower torso infant insert is recommended for babies 4-8 lbs and is necessary to get a good fit on this very tiny doll.

Adjusting the harness and headrest is a snap. Simply pull the tab at the top of the seat and push the caput residual upwardly or down. It slides effortlessly and clicks into place with each position. There are 5 summit positions that range from approximately 5.v″ to 10″ tall.

The tab above the headrest is hands pulled, allowing the headrest the slide up and down with the harness to attain proper fit.

Cover/Maintenance/Ease of Use:

The comprehend is non costly, but it'southward not rough either. It's easily wipe-able for those well-known projectile spit-ups, and is also easy to remove to machine wash (cold water, delicate bicycle, mild detergent, air dry apartment). The cover has these nifty little cut-outs on the sides where y'all can place the tongues of the buckle and then you don't accept to dig them out from under the babe when yous identify him in the motorcar seat. The canopy is made of a different material, is SPF 50, and can be spot-cleaned or removed completely for washing (cold h2o – hang to dry).  It's stretchy and pretty slick. My favorite part? The manner information technology folds down. There is none of that obnoxious flapping around of the canopy when folded and the handle doesn't get caught up on information technology. It simply folds downwards seamlessly against the meridian of the seat and nigh looks similar there isn't a canopy at all.

The manual is very piece of cake to read: the pictures are clear and the directions are easy to follow. I appreciated the boosted comments of keeping children rear-facing to at Least two years old, and to not place beefy jackets or blankets on the child that interfere with the harness. The cleaning instructions are also very detailed, and accompanied by pictorials. There are illustrated instructions included for attaching the seat to the CRUZ or VISTA strollers. The manual is also downloadable from UPPAbaby'due south website in case the paper re-create is lost.

Stroller Compatibility

MESA is compatible with both the UPPAbaby CRUZ and VISTA strollers to create what UPPAbaby refers to equally a "Performance Travel Organization." Zipper to the CRUZ does not require any adapters but attachment to the VISTA does and those adapters are included in the box with the carseat. In that location are besides MESA adapters available from Baby Jogger that make this carseat compatible with several Babe Jogger strollers. Ane adapter works specifically with the City Mini, GT, Elite, Summit 90 & Summit X3 strollers. A dissimilar adapter is required for attachment to Baby Jogger Urban center Select or Metropolis Versa strollers.

FAA-Approving/Lifespan/Crash Guidelines :

The UPPAbaby MESA is certified for use on aircraft, but the carrier must be installed baseless; the base is non FAA-canonical. In the event of expiration or any type of vehicle crash, the MESA needs to be replaced. The lifespan of this seat is 7 years from the appointment of manufacture. You can find this data on the bottom of both the carrier and the base.

Extra Bases & Optional Accessories:

Actress MESA bases are sold separately and retail for around $119. A MESA carseat rain shield is available for $19.99 and also fits over the VISTA or CRUZ stroller bassinet. For lord's day and insect protection in warm weather in that location is the UPPAbaby MESA Cabana Shade for $29.99.

MESA Advantages:

• 35 lbs. weight limit and alpine crush to conform larger babies
• 4 lbs. minimum and great fit on pocket-sized babies, including preemies
• Generous fold-away canopy with no excess material
• Small chest clip
• IMMI buckle is easy to buckle and unbuckle
• No-rethread harness with a front adjustable headrest
• Super easy LATCH installation and congenital-in lockoff for seatbelt installs
• Recline angle indicators on both sides of base of operations
• Slits in fabric on embrace allow buckles to exist tucked out of the style when putting a child in the seat
• Cover is machine washable (cold h2o, delicate cycle, mild detergent, air dry flat)
• 7-twelvemonth expiration allows for use with multiple siblings
• 2-year warranty with proof of purchase (keep that receipt!)—extend it by an actress year by registering your seat within the first three months after purchasing!

Disadvantages:

In fairness, these may non be a problem for anybody only I listing some potential disadvantages that may be an issue for some parents:

• Harness is non removable or replaceable (harness tin can be spot cleaned using warm h2o and mild detergent but it cannot be removed or replaced)
• Made in China

Conclusion:

The UPPAbaby MESA is an outstanding babe seat with a seamless install, beautiful color options, and it fits babies of various sizes nicely, including depression birthweight infants. My son (who is not a large fan of being strapped in the carseat) doesn't fuss every bit much in it every bit he does in his current ride, and doesn't get as angry when I buckle him upwards. Information technology's nice and roomy on the inside and the head protection slides upward and down with ease to fit the child. Information technology comes with attachments to UPPAbaby's high-end VISTA stroller and can also be used with the CRUZ (without any adapters needed) which tin can save you a few bucks if you wanted to employ this seat every bit a travel organisation. I was highly impressed with the awning, which I'm very picky near.

Overall, the MESA is packed with an affluence of premium safety and convenience features. At that place is a lot to beloved and for that reason, MESA is on our list of Recommended Carseats! Since information technology fits preemies and depression birthweight babies so well, MESA is also on our carve up list of Recommended Infant Carseats for Preemies & Multiples.

The UPPAbaby MESA Infant Carseat retails for $299.99 and more than information tin exist found at www.uppababy.com/mesa.

Thanks to UPPAbaby for providing this seat for review and to baby Logan for allowing me to use his itty-bittiness. No other compensation was provided and the opinions and comments are entirely those of CarseatBlog!

Picky baby canonical!

CarseatBlog Experts Rating

Recommended: Mesa

When Is Baby Too Long for Mesa Car Seat Pictures

Source: https://carseatblog.com/26029/on-the-up-and-up-with-the-uppababy-mesa-infant-carseat-review/

Share :